Type: | Fiber Amplifier |
---|---|
Certification: | CE, ISO |
Operation Wavelength: | 1530-1565 Nm |
Gain: | 35dB, 40dB, 45dB |
Communication Protocol: | RS232 |
Connector: | FC/APC, FC/PC |
Customization: |
---|
Suppliers with verified business licenses
The C Band pre erbium-doped fiber amplifier is a high gain, low noise Pre-EDFA. It is used to amplify weak optical signals, improve receiver sensitiveness, and extend the transmission distance of signals. This series of amplifier has an optimized optical path structure cooperates with carrier-grade 980nm pump laser to achieve high performance small signal amplified output. Based on a stable and efficient internal control system, combined with high precision ATC and ACC(APC) control circuits, the amplifier achieves stable and reliable operation. All product status parameters and configuration information can be remotely monitored and configured by the host computer. These fiber amplifiers are available in a variety of encapsulation types to meet different application requirements.
Parameter | Unit | Min | Typ | Max |
Operation Wavelength | nm | 1530 | 1550 | 1565 |
Input Optical Power | dBm | -45 | - | -25 |
Saturated Output Power | dBm | - | - | 20 |
Small Signal Gain | dB | 45 | - | - |
Output Power Modulation Range | % | 0 | - | 100 |
Noise Figure | dB | - | - | 4.5 |
Polarization-dependent Gain | dB | - | - | 0.5 |
Polarization Mode Dispersion | ps | - | - | 0.5 |
Input/output Isolation | dB | 40 | - | - |
Operation Temperature Range | °C | -5 | - | 55 |
Storage Temperature Range | °C | -40 | - | 85 |
Pigtail Type | SMF-28e | |||
Supply Voltage | VDC | 5 | ||
Product Size | mm | 150x125x20 / 90x70x15(Module) | ||
296x260x89(Benchtop) | ||||
Communication Protocol | RS232 | |||
Operation Mode | ACC/APC |
EDFA-PA | Gain(dB) | Pigtail Type | Pigtail Length | Connector | Module Size |
35 40 45 |
09-0.9mm 2-2mm |
1 =1m 2 =2m |
1=FC/APC 2=FC/PC |
M1=150x125x20 M2=90x70x15 B=Benchtop |
Suppliers with verified business licenses